DWGTEXTINNERPANELOFFSET
Last modified by superadmin on 2021/05/04 17:12
Panels with different heights can be dimensioned. Note, works only for sandwich and insulated walls.
The project setting, Dimension panel offset, in project properties needs to be set to "Yes"
The inner panel is shorter than the outer panel.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
DWGTEXTINNERPANELOFFSET | 0 | 0 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
DWGTEXTINNERPANELOFFSET | 0 | Offset IP |