DWGTEXTOUTERPANELOFFSET

Last modified by superadmin on 2021/05/04 17:28

Panels with different heights can be dimensioned. Note, works only for sandwich and insulated walls.

The project setting, Dimension panel offset, in project properties needs to be set to "Yes"

qqqqqqqq.png

The outer panel is shorter than the inner panel.

DWGTEXTOUTERPANELOFFSET2.png

Example of the IMPACT default setting:

VariableTypeValue
DWGTEXTOUTERPANELOFFSET00

DWGTEXTOUTERPANELOFFSET0.png

Example with a user default setting:

VariableTypeValue
DWGTEXTOUTERPANELOFFSET0Offset OP

DWGTEXTOUTERPANELOFFSET1.png