DWGWALLHORZSECTIONCIM

Last modified by superadmin on 2021/05/04 17:09

Controls if the cast-in materals should be shown or not in the horizontal section.

Example of the IMPACT default setting:

VariableTypeValue
DWGWALLHORZSECTIONCIM01

DWGWALLHORZSECTIONCIM1.png

Example with a user default setting:

VariableTypeValue
DWGWALLHORZSECTIONCIM00

DWGWALLHORZSECTIONCIM0.png

When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place. 

The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.

Once a section is created it will have its own settings which can be different from setting in Standard Admin.

RESEA.png

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki