FRONTWALLPANELVOLUMEFACTOR
Last modified by superadmin on 2021/05/04 17:14
When producing a sandwich element the top in form panel press the isolation if the isolation layer is thick.
So the volume of the sandwich element isn't accurate when the insulation is pressed.
Therefore should this variable in Admin tool that makes it possible to add a safety factor to the volume of the inner panel.
Example:
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
FRONTWALLPANELVOLUMEFACTOR | 0 | 1.01 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
FRONTWALLPANELVOLUMEFACTOR | 0 | 1.15 |