Only adds one section in each direction for walls if the value is set to 1.

Example of the IMPACT default setting:

VariableTypeValue
SINGLESECTIONSWALL00

0ssw.png

Example with a user default setting:

VariableTypeValue
SINGLESECTIONSWALL01

1ssw.png

When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place. 

The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.

After the change, the drawing must be redrawn or updated.

6.png

Tags:
Created by Adam Carlson on 2021/01/25 13:21
Copyright 2020 StruSoft AB
IMPACT Documentation