VERTSECTIONWALLNODOOR

Last modified by AdamCarlson on 2023/05/25 08:02

Adds an extra vertical section for walls if there is a door where the first section is taken.

Note: SINGLESECTIONSWALL can not be set to 1 if this variable should work, it has to be set to 0 or not present in standard admin. Otherwise, only one section will be drawn.

Example of the IMPACT default setting:

VariableTypeValue
VERTSECTIONWALLNODOOR01

vvgg1.png

vvgg2.png

Example with a user default setting:

VariableTypeValue
VERTSECTIONWALLNODOOR00

vvgg3.png

vvgg4.png