Show last authors
1 (% class="row" %)
2 (((
3 (% class="col-xs-12 col-sm-8" %)
4 (((
5
6
7 = Overview =
8
9 Configuring a licence source is done in the// Licensing & Settings// tab in [[StruSoft Installer>>doc:Installation.StruSoft Installer.WebHome]]. This section will be divided into 5 procedure steps, which will easily show all the steps.
10
11 == Procedure ==
12
13 When the //StruSoft Installer// is opened, click the //Licensing & Settings// tab (1) and click Manage License Sources (2). Next, click Add (3) and enter @ followed by the name of the server, in this case, @Impactserv2016, in the Host field (4). Notice that you do not need to enter a //Specific port// if the host is set to default. When this is done, finish adding the license source by clicking //OK// (5).
14
15 [[image:2.5).png]]
16
17 //Figure 1: Adding a new license source in StruSoft installer//
18
19 ----
20
21 Continue with the installation: [[Configure printers and plotters!>>doc:Installation.Configure printers and plotters.WebHome]]
22 )))
23
24 (% class="col-xs-12 col-sm-4" %)
25 (((
26 (% class="box" %)
27 (((
28 [[image:http://strusoft.com/sites/default/files/creep-calc-final-940x415_0.png]]
29 //Figure 2: This image is about...//
30 )))
31
32 (% class="box" %)
33 (((
34 **Contents**
35
36 {{toc/}}
37 )))
38 )))
39 )))
Copyright 2018 StruSoft AB
Impact Documentation