Draw linked elements
Draw stairs
Open the level 1.
Go to IMPACT - Elements - Draw slab to start the command.
Select the definition '1000x1750x1170' from project level (1). Edit the values of the element (2) according to Figure 1. Finish with 'OK' (3).
Figure 1. Select the definition.
Draw two stairs between grid 2-3 and D-E. This needs to be done in two steps.
- Place one of the stairs and rotate one more stair with the space key and place a second stair.
- Use the move command to place the stairs according to the external reference.
Figure 2. Draw stairs.
The two stairs will go from first level to the second level. To fix this, it's easiest to use a section. We have 'Section 1' prepared that we can use.
Move it from grids B-C to D-E. Modify the view depth.
Figure 3. Move section.
Go to the project browser and open the section view.
Figure 4. Open the section view.
Figure 5. Section 1.
the stair that goes from left to right should start from half way up. Select it and change the elevation from level to 1180.
Figure 6. Edit elevation.
Draw landing
Now it's time to draw the landing.
Open level 1.
Go to IMPACT - Elements - Draw slab to start the command.
Select 'SS19' from project level and draw one slab as a landing with the rectangle method.
Figure 7. Draw landing.
Edit the support length and endcaps.
Figure 8. Edit support length and endcaps.
Change the placement to 'Top' and elevation offset to 1170mm. Finish with 'OK'.
Figure 9. Edit placement and elevation.
The stairs and landing is now done.
Figure 10. Stairs and landing.
Draw slabs
The last step is to draw the slabs in the stairwell on level 2.
Go to IMPACT - Elements - Draw slab to start the command.
Select 'SS19' from project level and draw slabs with the rectangle method.
Figure 11. Draw slabs.
Modify the support length and endcaps according to Figure 12.
Figure 12. Edit support length and endcaps.
Change the placement to 'Top' and elevation offset to -57mm. Finish with 'OK'.
Figure 13. Edit placement and elevation.
Figure 14. Stairs, landing, and slabs.