Packing List
Introduction
This report lists all the elements that the user selects and it shows information about reinforcement, wires, girders, element weight, and the element area.
Report Setup
General report setup. All the fields have to be filled if you want a summary row at the end of each page.
Page max X and Page max Y defined the maximum size of the report page.
The X-axis is the columns A, B, C etc. The Y-axis is the rows 1, 2, 3 etc.
Continuous Header Row defines in which row the header and footer start, and in this case, it starts from row 0.
Continuous Start Row (in this case from row 11) is where the main information starts and Continuous End Row (in this case until row 35) is where the main information ends.
If the last filed would be filled a summary for each page would be created at the end of the page.
Header setup:
Here is how the header is set up for this report.
As you can see we have different X and Y values for each field. This is done so the program knows where to put in the specific information into the report.
As mention above, the continuous header starts at row 0 to row 10 in the Y direction.
Here are the fields that can be added to the Header and Footer:
Fields | Description |
BUILDING | |
DIVISION | |
FACTORY | |
PHASE | |
PROJECT | |
PROJECT_SUMMARY | |
REPORT_NAME | |
REPORT_PAGE_NUMBER | |
REPORT_PRINT_DATE | |
REPORT_REVISION | |
REPORT_REVISION_DATE | |
REPORT_TITLE | |
SELECTION_PRODUCT | |
START_DATE | |
USER_DIVISION_CITY | |
USER_DIVISION_COUNTRY | |
USER_DIVISION_DESCRIPTION | |
USER_DIVISION_FAX | |
USER_DIVISION_NAME | |
USER_DIVISION_PHONE | |
USER_DIVISION_STREET | |
USER_DIVISION_ZIPCODE | |
USER_MOBILE | |
USER_NAME | |
USER_PHONE | |
USER_SIGNATURE | |
USER_TITLE |
Selection setup:
The standard setup for the selections.
Continuous setup:
The Continuous setup is where you set up all the information, in this case, about the packing list.
As you can see, here you define only one row because this row will be the basis for this report, from row 11 to 35 as shown further up.
The fields you can add to this section are listed below.
Fields | Description |
ELEMENT_MARK | |
ELEMENT_BOUNDING_BOX_AREA | |
NO_OF_STRANDS_DESIGN | |
MESH_MARK | |
PRIMARY_RC_NBR_OF | |
PRIMARY_RC_DIMENSION | |
PRIMARY_RC_SPACING | |
PRIMARY_RC_LENGTH | |
SECONDARY_RC_NBR_OF | |
SECONDARY_RC_DIMENSION | |
SECONDARY_RC_SPACING | |
SECONDARY_RC_LENGTH | |
WIRES_NBR_OF | |
WIRES_DIMENSION | |
GIRDER_DIMENSION | |
GIRDER_HEIGHT | |
GIRDER_NBR_OF | |
ELEMENT_WEIGHT | |
ELEMENT_GROSS_AREA | |
ELEMENT_NET_AREA | |
COVER_BOTTOM | |
ELEMENT_MATERIAL | |
ELEMENT_THICKNESS | |
REINFORCEMENT_WEIGHT | |
PRIMARY_REINFORCEMENT_WEIGHT_PER_M2 | |
SECONDARY_REINFORCEMENT_WEIGHT_PER_M2 | |
REINFORCEMENT_WEIGHT_PER_M2 |
Print report
From Report Tool
It is possible to make the normal selection on what to print, based on the information you want to get out of the report.
You also have the option to save your selection.
When clicking on "Print" you will be prompt with the option to create the path for the report. Select yes and the report will be created and stored under the project folder.
If you add elements or change anything in the project and print the report again, the report will make a new file and store the difference in the new file, so that you can see what has been changed in the project.