When a bar is connected to a distribution line, how is the number of bars calculated?

Last modified by Adam Carlson on 2019/07/03 13:59

Rules

  • The distribution line is always drawn all the way to the edge, see figure 1.
     
  • The distribution line can start/end at an edge or sometimes connect to another distribution line, see figure 1.
     
  • The calculation is general so that data such as "covering concrete layer" and/or "s/2" do not need to be entered for each end. This also applies to distribution lines with several segments, see figure 2.
     
  • Normally, the distance s/2 is used for the first and last bar, see figure 3 and 4.
     
  • The calculation is conservative, and the function adds an extra bar when the last distance exceeds s/2.
     
Of course, the bar does not need to be connected to a distribution line, and then the number can be entered manually.

Antalstanger3a.gif

Figure 1

Antalstanger4a.gif

Figure 2

Antalstanger2a.gif

Figure 3

Antalstanger3a.gif

Figure 4

 

Contents

Tags:
Created by Adam Carlson on 2019/07/03 13:36
Copyright 2018 StruSoft AB
Impact Documentation