Draw Cast in material in floor plan using the element with surface detection and more
Last modified by Peter Karlsson on 2022/09/26 07:43
Draw cast in materials on floor plan has been change to allow to draw it with ease in the 3D model.
Now you can:
- Draw directly on the element
- Pick element side “On-Screen” and don’t worry about specifying different views and rotations for floor plan and shop drawing.
- Specify side and the “UCS” will be set accordingly, use the jig option “MoveUCS” for drawing on special surfaces.
- Use the jig options “offsetX”, “offsetY”, “Add90°”, “Subtract90°” and “Justify” for easier placement.
- Draw multiple cims in one command, switch cim component with the jig option “Properties”.
- Use the jig option “alignBoundary” for slabs to align the cim to the element boundary.
- Use jig option “Undo” if a CIM wasn’t drawn correctly.