Corbel

Note: Corbels can be used for both columns and walls

Start with launching the Corbels command.

Figure 1: Corbels

Choose what type of corbel that should be defined (single, double or multiple), and create a new opening on any level. 

Figure 2: Types of corbels. From left: Single, Double, and Multiple 

Figure 3: Create new Corbel

Figure 4: Define the geometry of the Corbel

Figure 5: Add lift to the Corbel

Draw Corbel

Start with launching the Draw Corbel command.

Figure 6: Draw Corbel

Figure 7: Draw Corbel dialog

1. Corbel - select Type and Name of the Corbel that is going to be drawn
2. Sides - which side of the element to insert the Corbel
3. Elevation corbel - on what elevation should the Corbel be inserted on 

Figure 8: Corbel is drawn on the right side of the column