Lift point placement for From slabs

Last modified by Catalin Turluc on 2023/08/22 11:21

Outer 1/3 of lift distance

In IMPACT 17 for Revit, we introduce a new automatic method of inserting lift points in oversized Form slab. It is now possible to insert extra lifts that are placed 1/3 of the lift distance between the first lift points and maximum edge distance for the first lift points of 1250 mm.

The new automatic method of inserting lift points in oversized Form slab is configured in Form slab definition under the Lift tab. 

The extra lift points for oversized Form slabs will always be placed inside the distance between the normal lift points. 

Outer one third of lift distance.png

Figure 1 - Configuring new method of inserting extra lift points in Form slab definition

Below we are highlighting some examples of inserting extra lift points with the new method in oversized Form slabs with different shape and size. 

Note: When the form slab is configured with support length, then the maximum edge distance will also include the support length.

L-shape form slab without support length.png

Figure 2 - Extra lift points added with the new method in Form slab without support length

Extra lift points in rectangular form slab without support length.png

Figure 3 - Extra lift points added with the new method in a rectangular Form slab without support length

Extra lift points in L shaped form slab with support length.png

Figure 4 - Extra lift points added with the new method in Form slab with 80mm support length

Extra lift points in rectangular form slab with support length.png

Figure 5 - Extra lift points added with the new method in a rectangular Form slab with 80mm support length

 

Tags:
Copyright 2023 StruSoft AB
IMPACT Wiki