Material for fillings in Form Slabs

In IMPACT for Revit it is now possible to select the material of a filling inserted in Form Slabs. 

The new option can be found in the Filling definition under the "Endstop" tab.

Figure 1 - Selecting material of a filling in the Endstop definition 

The filling materials displayed in the dropdown list in IMPACT Revit are configured and coming from IMPACT Standard Admin. 

Figure 2 - Materials configured in IMPACT Standard Admin

Once the filling definition is configured, we are ready to draw it with the material we selected in the definition.

Start the "Draw hole" command and select one of the two options -  filling cut mesh or filling keep mesh.

Select the filling definition - in this example we are using filling cut mesh.

Select the filling definition and draw the hole. 

Figure 3 - Selecting the filling cut method

Figure 4 - Selecting filling definition

The "Material" parameter from the filling properties is now showing the material of the filling which was previously configured in the definition. 

Figure 5 - Material of a filling inserted in Form slab