Insert Profile Mesh

Insert Profile Mesh is a new feature in IMPACT for Revit which gives the possibility to insert different mesh profiles in the element.

Figure 1 - Insert Profile Mesh in IMPACT Revit 

Set the work plane on an element and draw the lines which define the mesh profiles.

Figure 2 - Lines on a wall that define the profile mesh

Start the Insert Profile Mesh Profile function and select the mesh definition. If necessary, type values for cover and depth. The final option that needs to be set up is the panel where the mesh will be inserted. The user can select to insert the mesh in inner, outer and both panels.   

Once the settings have been made, press on Pick Profile button and select the lines which define the mesh profile. End the selection of mesh profile by pressing on Finnish.

The Insert Profile Mesh dialogue window pops up again and user can double-check if the correct values are going to be inserted. Insert the mesh profile by pressing OK.

Figure 3 - Inserting two profile mesh on a wall