Changes to the Double wall summary type 2 report,bounding box are for one shell connected to shell thickness added, new intervals for holes added, length of non orthogonal segments added.
Bounding box area for each shell added to the fields.
BOUNDING_BOX_AREA_ONE_SHELL_55
BOUNDING_BOX_AREA_ONE_SHELL_60
BOUNDING_BOX_AREA_ONE_SHELL_65
BOUNDING_BOX_AREA_ONE_SHELL_70
BOUNDING_BOX_AREA_ONE_SHELL_75
BOUNDING_BOX_AREA_ONE_SHELL_80
BOUNDING_BOX_AREA_ONE_SHELL_85
BOUNDING_BOX_AREA_ONE_SHELL_90
The bounding box is the biggest length times the biggest height for the shell (the size of mould it will take).
New fields added for holes:
HOLE_ONE_SHELL_AREA_025_OR_LESS
HOLE_AREA_025_OR_LESS
HOLE_WITH_ENDSTOP_DIAMETER_250_OR_LESS
HOLE_DIAMETER_250_OR_LESS
HOLE_ONE_SHELL_DIAMETER_250_OR_LESS
There is also a feature added which calculates the non orthogonal edges of the element. LENGTH_NON_ORTHOGONAL_SEGMENTS.
In the example below the double wall have one non orthogonal side at panel 2 (4510) and two non orthogonal sides at panel 1 (4610 + 4510).
The sum of these will be 13630 mm which is presented in the reports as well.