Introduction

This is a report for each casting bed, scanning it will show you the elements planned for today.

Report Setup

General report setup. There are no continuous fields in the report therefore we set the values for that to 0

Page max X and Page max Y defined the maximum size of the report page.
The x-axis is the columns A, B, C, etc. and the Y-axis is the rows 1, 2, 3, etc.

Continuous Header is defined in which row the header and footer start, and in this case, it starts from row 0.

In this case, we have no Continuous so the header makes the label itself.

Header setup: 

Here is how the header is set up for this report.

As you can see we have those x and y values for each field, so the program knows where to put the specific information into the report.

As mentioned above the header starts at row 0 to row 10 in the Y direction.

Here are the fields that can be added to the Header and footer:

Print report

From the resource manager
This report can be printed from The Resource Manager settings tab as shown below.

Example

Download

You can download the report template here