Inloader
Last modified by Dennis Knudsen on 2023/02/28 09:45
The picture below shows how the different settings are used on the Inloader.
Stack Length – The length of the Stack
Stack Width – The width of the Stack
Height – The height of the Stack
Tolerance X – Tolerance between elements in the X-direction.
Tolerance Y – Tolerance between elements in the Y-direction.
Tolerance Z – Tolerance between elements in the Z-direction.
Thickness – Thickness of the gable
Placement gable 2 – Placement of the second gable
Layer 1 – The layer placement of the elemnets
Layer 2 – The layer placement of the elemnets
