Save hollow cores

Last modified by Linus Karlsson on 2024/05/29 14:58

It is time to save the slabs and balconies. 

Go to IMPACT - Elements - Save Hollow Cores to start the command. 

Start with selecting all slabs. We are getting the prefix HC from the definition, but we want to control the numbering so that we start from HC100. To change that, select all elements in the list so that they end up blue and press 'Renumber selected'. Write 'HC100' and press apply. All the elements will now get renamed. End with 'Save'.

save hc.gif

Figure 1. Renumber hollow core slabs.

Next: Linked elements