New

New: where you are now able to move the dimension text on the sections of every element. (Case 90678)
New: Two new dimension settings for LCIM. (Case 72879)
New: Support for AutoCAD 2021. (Case 88223)
New: Separate layer for the reinforcement group in the solid view. (Case 38844)
New: Separate layer for the endcap reinforcement distribution line. (Case 47692)
New: Preselected blocks when starting Draw CIM command in IMPACT can be converted to  IMPACT Cast in materials. (Case 73367)
New: Possible to turn off if cast in materials should be added to the total measure. Controlled by the Standard Admin variable "AUTOUPDATEELEMENTCIMEXTENTS". (Case 90326)
New: Possible to dimension MEP-Keys in sections. (Case 71925)
New: Possible to add Recesses to corbels. (Case 66116)
New: Optimization of corbel dimension. (Case 72040)
New: New variable "DWGVPORTSCALETOFITROUNDOFF", which determines the round off for "scale to fit" scale, default 5. (Case 89352)
New: Make a button to turn off the label of the slab endcaps on the floor plan. (Case 90320)
New: Locked drawings can no longer be saved. (Case 90243)
New: Front & Back option added to the outer panel for bar mesh. (Case 66760)
New: Disconnect bar option added to the CIM definition. (Case 83148)
New: Command "Edit Reinforcement Group" now has the possibility to change the rotation of the text for the reinforcement group. (Case 89849)
New: BVBS export, possibility to add chair mesh block for the straight bars in a reinforcement group. (Case 84543)
New: Auto add single corbel to wall and column. (Case 90090)
New: After finished edit CIM command the cast in materials should be unselected. (Case 90262)
New: "Horizontal" in Bar mesh added to the mesh text in the section. (Case 79358)

Fix

Fix: Where the revision block did not react as intended with the geometry controlling the height. (Case 92307)
Fix: where rotated dim text was too far away from the dim line. (Case 92028)
Fix: Where flipping a wall element with corbel, the corbel gets mirrored. (Case 92191)
Fix: Where edge for form slabs could not have space in the name. (Case 92252)
Fix: when endcap label has been moved on a shop drawing it jumps back to original placement after MTO. (Case 84456)
Fix: When draw Hollowcore slab with method window the support lengths from project properties added to on one side even if apply is clicked directly. (Case 89413)
Fix: Were opening a newly made shop drawing took to long to open. (Case 91910)
Fix: Were bcad feezes when drawing opening and picking elevation from the drawing. (Case 92222)
Fix: Update Objects on floor plan has several problems. (Case 89993)
Fix: Unable to select endcaps with a different thickness then the definiton for slabs. (Case 89372)
Fix: The elevation view is no longer offset when an endcap is attached. (Case 91851)
Fix: Special case where the recess was incorrect. (Case 90526)
Fix: Special case where reinforcement in the 3D solid wasn't shown correctly. (Case 90451)
Fix: Special case where a small difference in the depth placing of CIMs made them appear on separate dimension lines. (Case 90619)
Fix: Special case where a slab section with a filling couldn't be drawn. (Case 89357)
Fix: Special case where "MTO All Materials and Redraw Element" didn't work properly. (Case 89295)
Fix: Special case when editing an opening in an element generated an error. (Case 92297)
Fix: Slabdefintion connections options now sorted in alphabetical order. (Case 90665)
Fix: Slab with multiple endcaps where missing one of them in the presentation. (Case 92860)
Fix: Slab drawing method - Internal point. (Case 91905)
Fix: Scale set in the slab definition now matches the scale in the shop drawing. (Case 89697)
Fix: Recess not made as cut out for slabs but having the height of the full width of the slab was shown with extra lines in wireframe. (Case 90401)
Fix: Problem with saving dwi file for linked elements. (Case 89958)
Fix: No longer possible to delete elements from the database if the drawing is locked by another user. (Case 90239)
Fix: MTO CIM does not remove the old dimension lines for slabs. (Case 89375)
Fix: Mirror slab on floor plan gives problem with the endcaps. (Case 92887)
Fix: MEP-Key in left/right now inserted correctly. (Case 90229)
Fix: Measurement is now shown for the solid slabs height. (Case 92613)
Fix: LCIM rotation when using edit. (Case 72336)
Fix: If there are multiple sections, the text next to the section in the drawing will show the amount for the most strands. (Case 90733)
Fix: Endcap creation is now compatible with a user-defined coordinate system. (Case 89392)
Fix: Edit mesh, unable to change from double mesh to single mesh for slab. (Case 90026)
Fix: Edit corbel on elevation turns off object grouping in options. (Case 90655)
Fix: Due to issues with double-click editing of multiple Cast.in materials, it's now restricted to single Cast.in materials. (Case 89819)
Fix: Changing the length in "Edit Element" and confirming with "Enter" now works. (Case 91846)
Fix: Changing back and forth the "General" and "Cast-in material" in corbel definition made AutoCAD crash. (Case 90621)
Fix: Changes on the shop drawings on linked elements now apply correctly on the plan drawing. (Case 90693)
Fix:  Insert Endcap command in properties now works. (Case 90738)