New

New: Split Double Wall vertically command. (Case 119158)

New: Possibility to define default values for support length in Project Manager, which will be read once the user draws Slabs, Form Slabs and Hollowcores in IMPACT Revit. (Case 118283)

New: Number of Duct connections is set default to ´1´ in MEP defintiions. (Case 117709)

New: It is now possible to update revisions and drawing properties for plan, elevation, and, other drawings. (Case 119944)

New: It is now possible to set the placement offset of the Hollow core, Slab, Pre-Stressed Slab and From Slab before drawing it. (Case 118257)

New: It is now possible to insert opening with frieze. (Case 118525)

Fix

Fix: The new schedule not using the view template from the Shop drawing template settings. (Case 118564)

Fix: Shop drawing views are now shown correctly after renaming in the shop drawing template. (Case 119341)

Fix: Resolved the issue where the IMPACT CIM Reference was not reflected in the CIM definition. (Case 119038)

Fix: resolved the issue where the endcaps were inserted wrong in slab edge. (Case 119608)

Fix: Resolved the issue where the electric box was rotated and the pipe was missing when inserting MEP key. (Case 119088)

Fix: Resolved issue where sections and mold symbols were placed wrong in the drawings. (Case 119836)

Fix: Resolved issue where sections and mold symbols were not correct. (Case 120057)

Fix: Resolved issue where CIM was not added to the element when generated from DWG. (Case 118824)

Fix: Resolved an issue where an extra part was added when inserting an endcap. (Case 118858)

Fix: Fixed the issue where the wall was changing its placement when applying the joint. (Case 118424)

Fix: Fixed the issue where the tags were not inserted for all the elements. (Case 118818)

Fix: Fixed the issue where the MEP key was not inserted in the right place. (Case 118767)

Fix: Fixed the issue where the left and right endcaps were not applied as expected. (Case 118604)

Fix: Fixed the issue where the joint inserted the endcap at the wrong side of the wall. (Case 118848)

Fix: Fixed the issue where the endcaps were copied between the walls when splitting vertically. (Case 120139)

Fix: Fixed the issue where the elements saved from Revit are partially displayed in the model view in Project Manager. (Case 119648)

Fix: Fixed the issue where the elements saved from IMPACT Revit were placed on the wrong level in Project Manager. (Case 119643)

Fix: Fixed the issue where the element was getting assigned the same element mark when the option "For each building, floor and phase" was active. (Case 119874)

Fix: Fixed the issue where the element was getting assigned a different element mark when the option "For each building" was active. (Case 119870)

Fix: Fixed the issue where the element was getting assigned a different element mark when the option "For each building and phase" was active. (Case 119880)

Fix: Fixed the issue where the element was getting assigned a different element mark when the option "For each building and floor" was active. (Case 119873)

Fix: Fixed the issue where the CIMs inserted through MEP Key were not shown in CIM schedule. (Case 120042)

Fix: Fixed the issue where the CIM template was inserting the cast in materials in the wrong side of the element. (Case 117427)

Fix: Fixed the issue where a specific endcap was not getting inserted in wall. (Case 118798)

Fix: Fixed the issue where a different element mark was assigned to a wall with the same geometry as the other walls when the option "Always - for the whole project" was active. (Case 119821)

Fix: Fixed an issue where the endcap was not inserted as per definition. (Case 118606)

Fix: Fixed an issue where the wall join was not applied as per definition. (Case 118423)

Fix: Fixed an issue where the MEP Key was not placed in the same position as specified in definition. (Case 120214)

Fix: Fixed an issue where the joint was not found when connecting the walls. (Case 118400)

Fix: Fixed an issue where the joint was not applied as specified in the joint definition. (Case 119718)

Fix: Fixed an issue where the endcap view could not be added on sheet through Shop drawing template settings. (Case 119791)

Fix: Fixed an issue where the dimensions and annotations were missing from the Shop drawing. (Case 119318)

Fix: Fixed an issue where the CIM was not displayed in preview in joint definition. (Case 118275)

Fix: Fixed an issue where an error occurred during the elements remarking. (Case 119576)

Fix: Fixed a special case where the wall changed the level after splitting it vertically. (Case 118397)