New

New: The material is now cut out where the panel thickening is inserted. (Case 109310)
New: Show the Center of Gravity and its dimensions for all element types. (Case 108563)
New: Now supporting both length and text parameter type for 'Unit Length' parameter in dynamic and linear CIM. (Case 110688)
New: New parameters for primary and secondary reinforcement direction. (Case 106366)
New: It is now possible to see "Requested area" when using Minimum AS in Form Slabs. (Case 108583)
New: it is now possible to decide the color of the reference lined in shop drawings. (Case 108419)
New: It is now possible to control which points in an endcap that should be dimensioned. (Case 108134)
New: It is now possible to control the diagonal dimension from the Shop drawing settings. (Case 111726)
New: Insert/Update lift command shows the lifts that can withstand the element weight. (Case 87905)
New: Insert/Update Lift command shows the lifts that can withstand the beam and column weight. (Case 87903)
New: Insert/Update lift command shows only the lifts that can withstand the hollow core weight. (Case 87904)
New: Find Element command in IMPACT Revit. (Case 67894)
New: Added new parameters to the linked elements. (Case 109201)

Fix

Fix: Resolved the issue where the section arrows moved when updating the Shop drawing. (Case 111593)
Fix: Resolved the issue where the reinforcement schedule was not generated without decimal values. (Case 108631)
Fix: Resolved the issue where the panel thickening was placed outside the element. (Case 109230)
Fix: Resolved the issue where the mould symbol was not inserted in Shop drawing. (Case 109729)
Fix: Resolved the issue where the mesh could not be added to a specific wall. (Case 107773)
Fix: Resolved the issue where the lifts were removed from the wall after adding an endcap. (Case 109255)
Fix: Resolved the issue where the IMPACT Barmark definition was not assigned correctly to the bars. (Case 110873)
Fix: Resolved the issue where an error occured when updating the Shop drawing. (Case 109892)
Fix: Resolved issue where the wrong user was shown as creator of the project when created from Revit. (Case 110767)
Fix: Resolved issue where the split wall command did not work when one of the walls ended up with a height of a few millimeters. (Case 110320)
Fix: Resolved issue where the behavior of sections was not as expected when 'repeatable views' was used. (Case 108966)
Fix: Resolved issue where the 'Exclude Partial Slab' did not work as expected. (Case 110377)
Fix: Resolved issue where templates for Revit 2022 could not be used. (Case 111111)
Fix: Resolved issue where slabs and hollow cores could not be drawn with a slope. (Case 110067)
Fix: Resolved issue where Min AS did not work as expected for form slabs. (Case 108584)
Fix: Resolved issue where lattice girders was not inserted in narrow form slabs. (Case 108635)
Fix: Resolved issue where insert edge in slabs did not work for specific elements. (Case 112007)
Fix: Resolved issue where IMPACT did not work when the user opened a local copy of the central file. (Case 109770)
Fix: Resolved issue where dimension settings for 'Add Section' were not updated properly. (Case 107748)
Fix: Resolved issue where "Edit Panel Length" command did not work as expected. (Case 108564)
Fix: Resolved an issue where the main geometry dimension was measuring the protruding reinforcement. (Case 108627)
Fix: Resolved an issue where the endcap labels were placed on the wrong side of the element. (Case 109891)
Fix: Resolved a special case where other endcap values were shown incorectly. (Case 108405)
Fix: Fixed an issue where there was no information about the nested families in the Pcp export. (Case 109976)
Fix: Fixed an issue where the nested families were not saved into the database. (Case 109716)
Fix: Fixed an issue where the MEP key dimension text was shown wrong in Shop drawing. (Case 110152)
Fix: Fixed an issue where the lifts were not inserted in wall after splitting vertically. (Case 109251)
Fix: Fixed an issue where the hole was not inserted into the element. (Case 109459)
Fix: Fixed an issue where the Edit boundary command was requiring a Slab license. (Case 112638)
Fix: Fixed an issue where the dimension lines were not generated in Shop drawing. (Case 109721)
Fix: Fixed an issue where the corbel was not inserted in column. (Case 111985)
Fix: Fixed an issue where the corbel could not be inserted for some specific columns. (Case 113008)
Fix: Fixed an issue where the beam geometry in Project Manager was not represented the same as in Revit. (Case 108259)
Fix: Fixed an issue where not all the levels could be seen when importing dimension settings. (Case 111725)