New

New: Added support for Revit 2024. (Case 125990)

New: Added "Edge and extents" dimension type for dynamic CIM. (Case 126505)

New: Lift point placement for FormSlab with a new method where the extra lifts are placed 1/3 of the lift distance between the first lift points and maximum edge distance for the first lift points of 1250 mm. (Case 127237)

New: Control the element face description of CIMs when the view is rotated in Shop drawing. (Case 126190)

New: Dimensioning opening endstops. (Case 127277)

New: It is now possible to add 3D details to a shop drawing. (Case 126430)

New: It is now possible to import/export, rename, delete, edit and copy the Shop drawing templates. (Case 128116)

New: It is now possible to use Bended Mesh in IMPACT for Revit. (Case 125110)

New: Preselection in "Open Shop drawing" (Case 127447)

New: The double wall elevation settings considers now the shorten panel. (Case 126622)

Fix

Fix: Fixed the issue where the dimensions for main geometry were wrong and misplaced after adding a section view in Shop drawing. (Case 126113)

Fix: Fixed the issue in Shop drawing where dummy lines where shown in section view and strand group label did not show the naming according to the strand pattern name. (Case 126254 )

Fix: Fixed the issue where main geometry dimension line was taking wrong reference in a circular column. (Case 126045)

Fix: Fixed the issue where the Shop drawing could not be generated with the transparency set in View template for column top or corbel. (Case 126051)

Fix: Wall endcap changes after saving walls and using insert/Update Lifts tool. (Case 126094)

Fix: When saving a slab in Revit and check Export to OBJ the slab is placed on the wrong location in Project Manager. (Case 12648)

Fix: Dimensions did not appear correctly when creating a Shop Drawing. (Case 126413)

Fix: Fixed the issue where elements saved from Revit were represented as rotated in Project Manager. (Case 125545)

Fix: Fixed the issue where endcaps for solid slab were not applied correctly and they were missing when editing the solid slab.

Fix: Fixed the issue where the dimension for Main geometry in a section view was taking wrong reference. (Case 126534)

Fix: Fixed the issue where the dimensions for Secondary geometry were not generated in Shop drawing. (Case 126102 )

Fix: Not able to create a Shop Drawing when saving a wall.(Case 126466)

Fix: Dimension lines appears when there is no countersinking. (Case 126453)

Fix: Fixed  a special case where dimensions with "0mm" were generated in Shop drawing. (Case 126532)

Fix: Fixed the issue where all the rebar annotations were gathered in one place in Shop drawing. (Case 126478 )

Fix: Fixed the issue where Edit double command caused a reset of the parameters. (Case 126576)

Fix: Fixed the issue where plotter was not available and could not print drawings for Linked elements. (Case 126901)

Fix: Fixed the issue where the MEP Key dimensions of both double wall panels were generated in one  panel view. (Case 126714)

Fix: Fixed the issue where the mould symbol was not rotated according to the view's rotation in Shop drawing. (Case 126605)

Fix: Not possible to add additional endcap when editing a wall. (Case 126470)

Fix: Resolved the issue where the mesh cover settings were not applied correctly to the double wall. (Case 126602)

Fix: When creating a Shop Drawing the measurements is shown wrong. (Case 126518)

Fix: When creating a Shop Drawing there was no mesh symbol added. (Case 126510)

Fix: Column is not connected to reference levels. (Case 127291)

Fix: Fixed an issue where the secondary geometry dimension line for column was not generated in Shop drawing. (Case 126624)

Fix: Fixed the issue where the dimension lines for slab connection recesses were showing wrong description in Shop drawing. (Case 126704)

Fix: Fixed the issue where the endstop type was not recognized in Draw opening for Double walls. (Case 126864)

Fix: Fixed the issue where the Lift and CIM definition name could not contain the character ".". (Case 127314)

Fix: Fixed the issue where the mesh area was not shown in schedule. (Case 126869)

Fix: Fixed the issue where the Rebar schedule was not filtered after generating a Shop drawing. (Case 126594)

Fix: RC Family - Chamfer issue where the voids are shown. (Case 127053)

Fix; Fixed the issue where the values of slab recess connections were not displayed in Shop drawing schedule. (Case 126707)

Fix: Fixed the issue where the elements saved as OBJ had wrong position in Project Manager. (Case 126600)

Fix: Fixed the issue where wall changed the direction after using Edit wall command. (Case 127321)

Fix: Improved the alignment of views and title names in Shop drawing. (Case 126043)

Fix: Switch panel command does not work correctly. (Case 126667)

Fix: Use label as opening mark is not set correct. (Case 127420)

Fix: When updating a double wall all the drawn rebars are removed. (Case 127375)

Fix: Dimension and opening are missing in Shop Drawing. (Case 127456)

Fix: Fixed the issue where extra MEP key pipes were created in Project browser. (Case 127678)

Fix: Fixed the issue where the corbel dimension were wrong in Shop drawing. (Case 126533)

Fix: Fixed the issue where the dimension lines were overlapping and description of circular recess was misleading. (Case 127515)

Fix: Fixed the issue where the recess from opposite panel was not represented with diagonal and hidden lines. (Case 126730)

Fix: Reinforcement is not inserted together with CIM in double wall. (Case 126982)

Fix: When adding a new section to the beam the justification is not shown correctly. (Case 127619)

Fix: Corbel with multi-planar rebar template does not work. ( Case 125751)

Fix: Fixed the issue where the dimension lines for opening were measuring multiple openings on the same dimension line. (Case 127632)

Fix: Fixed the issue where the mesh cover values of the same Double wall definition did not match in Revit and AutoCAD. (Case 127616)

Fix: Fixed the issue where the rebar template did not place the rebars correctly in a larger column. (Case 125955)

Fix: Missing viewport annotation when adding a section view. (Case 127436)

Fix: No warning of save element before creating Shop Drawing. (Case 127585)

Fix: PM will now show only one drawing of the element when generating a shop drawing with multiple Revit sheets in the assembly. (Case 127544)

Fix: Resolved the issue where the IMPACT Host parameter was always filled with value "Inner". (Case 127510)

Fix: Circular and rectangular recess has same values added next to the dimension line. (Case 127641)