New

New: Description field for shop drawing template is added to Manage Shop Drawings function as well as in the shop drawing template in General tab.  (Case 128355)

New: Dimension Tag Default setting for CIM dimension lines in the shop drawing template. The new Dimension Tag Default setting will be taken into use when a CIM is dimensioned only in the X-orY-axis. (Case 122833)

New: It is now possible to configure Dimension Line Edge Offset in the Shop Drawing template. Is is the distance between the element and the first dimension line on each side of the element. (Case 126214)

New: It is now possible to connect double walls that meet in a t-connection. (Case 126599)

New: it is now possible to decide if the geometry parameters for recess should be project parameters or family parameters. (Case 127986)

New: It's now possible to customize the data for the family template used to generate MEP pipes. (Case 127657)

New: Mould Up/Down symbol can be now set up for drawing views in a Linked element shop drawing template. (Case 128765)

New: Possibility to turn on/off Spot elevation settings for Main geometry and Opening components in an element, as well as Spot Elevation for Corbel in a column element. Spot elevation settings are controlled in the Shop Drawing template. (Case 121496)

Fix

Fix: 3D view shows also insulation when the view setting in the shop drawing template is set to Inner/Outer panel. (Case 128970)

Fix: Base height left and right gets reset when editing  double wall. (Case 128771)

Fix: Can not create Reinforcement Qualities. (Case 129598)

Fix: CIM definition with Reinforcement settings fails to insert S shape rebar. (Case 129206)

Fix: Dimension lines for linked element are placed incorrectly. (Case 128424)

Fix: Fixed the issue where an already inserted bended mesh was modified after inserting a different bended mesh in the same element. (Case 128914)

Fix: Fixed the issue where the countersinking values were not considered when drawing or editing Cast in material. (Case 128401)

Fix: Fixed the issue where the endstop could not be removed from Double Wall. (Case 128768)

Fix: Fixed the issue where the Jig radius value did not change according to the quality and dimension when the type was set to "Bended mesh". (Case 129336)

Fix: Fixed the issue where the material of prestressed beam was different in model compared with the material from the definition. (Case 128350)

Fix: Fixed the issue where the MEP inserted in inner panel was displayed also in out panel in Shop drawing. (Case 128785)

Fix: Fixed the issue where the rotation and insertion point of Bended mesh was wrong when placing it. (Case 128805)

Fix: Issue when saving linked element with CIM. (Case 128351)

Fix: Manage Barmarks functionality will now consider precision up to 3 decimal places. (Case 128500)

Fix: Mould Up/Down Symbol settings are greyed out in the shop drawing template for all elements except for wall and slab types. (Case 128476)

Fix: Resolved issue where inner panel down/up was not working as expected. (Case 129345)

Fix: Resolved issue where level 1 of endcap definitions could not be added to the definition on common level. (Case 129037)

Fix: Resolved issue where manage barmarks did not work as expected for linked elements. (Case 128754)

Fix: Resolved issue where the possibility to control what parts on an endcaps that should be dimensioned did not work as expected. (Case 128833)

Fix: Resolved the issue where manually drawn rebars were removed from wall after editing it.(Case 129213)

Fix: Section shows dimensions of a door that is outside of the section view range. (Case 129179)

Fix: When drawing sloped slab then the edge rebars will also be sloped. (Case 126530)

Fix: When unchecking  "Show in hole specification on shop drawing" the recess still appears in the schedule. (Case 127470)