Double Wall Shop drawing

Last modified by Linus Karlsson on 2021/08/30 14:59

DW - Shop drawing.png

Figure 1 - Double Wall Shop drawing template in IMPACT for Revit 

There are some special settings for Double Walls that can be controlled from Standard Admin. All of them are described in this article.

In order to eliminate the confusion about which panel is Panel 1 and which panel is Panel 2 when generating Double Wall Shop Drawing, the user can select how Panel 2 to be represented. The setting can be found in IMPACT Project Manager in Project Properties under the Walls tab. 

DW settings - panel 2.png

Figure 2 - Panel 2 upside down setting in IMPACT Project Manager 

Contents