The picture below shows how the different settings are used on the vertical rack.

Rack Length (L) – The length of the rack

Rack Width (W) – The width of the rack

Rack Height (H) – The height of the rack

Tolerance X (Tx) – Tolerance between elements in the X-direction.

Tolerance Y (Ty) – Tolerance between elements in the Y-direction.

Tolerance Z (Tz) – Tolerance between elements in the Z-direction.image-20200526134957-1.png

Created by Dennis Knudsen on 2020/05/26 13:49
Copyright 2020 StruSoft AB
IMPACT Documentation