Transport Vehicle - Inloader

Last modified by Oskar Kristinsson on 2022/10/26 08:36

The picture below shows an inloader and the placement of the pin & axle - The value that defines the distance should always be positive:

Dist 1 – The distance from the front of the Upper deck to the center of the pin.

Dist 2 – The distance from where the element can be placed to the axle.

image-20221026083552-1.png

NOTE: If it is a Bogie axle, the distance is to the middle of the two axles, if it is a Triple axle, the distance is to the middle axle.

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki