DWGCOLUMNSECTIONLOCATIONS
Last modified by Adam Carlson on 2021/05/11 08:25
Here you can set the locations of the sections as distances from the bottom of the column with a semicolon-separated list, 0;500;1800.
If the variable is not present then the section will be taken in the middle of the column.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
DWGCOLUMNSECTIONLOCATIONS | 0 | - |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
DWGCOLUMNSECTIONLOCATIONS | 0 | 0;500;1800 |