_dw_section
Last modified by Adam Carlson on 2022/01/20 14:12
Introduction
This block shows how the two panels are viewed in the doublewall.
How the block works
A doublewall have 2 separate panels linked with girders, this block shows how to view the separate panels on the shop drawing.
This is how the standard Strusoft block looks like in a drawing.
The block contains no attributes.
The block itself looks like this:
The Block
The block is located under ...\Standard\1100\1100\templates_drawings. 1100 must be replaced with your company number.
If the block is not needed, the dwg can be removed from the folder and it will not be shown.