MINWIDTHFORMSLABINSULATION
Last modified by Adam Carlson on 2022/08/15 11:08
Sets the minimum width of each insulation piece that can be added to formslabs.
The default is 20. The narrowest insulation in the default example has a width of 230. When the custom value of 250 is set the insulation is not drawn.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
MINWIDTHFORMSLABINSULATION | 0 | 20 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
MINWIDTHFORMSLABINSULATION | 0 | 250 |