NOTIFICATIONNBROFLIFTSFORMSLAB
Last modified by Adam Carlson on 2021/11/29 13:13
This variable gives you a warning if you do not have sufficient lift points based on your lift criteria in the definition.
The check is performed with the commands "Create shop drawings" and "Update shop drawing".
If the value is set to 3, a popup notification is shown.
If the value is set to 2, a notification bubble is shown. Note: It is first shown after you have made the shop drawing/ updated the drawing.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
NOTIFICATIONNBROFLIFTSFORMSLAB | 0 | 0 |
No warning is showing regarding this.
Example with a user default setting:
Variable | Type | Value |
---|---|---|
NOTIFICATIONNBROFLIFTSFORMSLAB | 0 | 1 |
The message is shown in the AutoCAD command bar. Note: this is not possible for the moment.
Example with a user default setting:
Variable | Type | Value |
---|---|---|
NOTIFICATIONNBROFLIFTSFORMSLAB | 0 | 2 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
NOTIFICATIONNBROFLIFTSFORMSLAB | 0 | 3 |