HCS_RECESS_BAR_GRAPHIC_MEASURE
Last modified by superadmin on 2021/05/04 17:07
The added bar from a 400 mm recess automatically adapts and is shown smaller so it fits the width of the hollowcore if the length of the bar is larger than the width.
The bar will still be counted as a "normal" length bar.
"0" or "1" meaning Off or On.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| HCS_RECESS_BAR_GRAPHIC_MEASURE | 0 | 1 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| HCS_RECESS_BAR_GRAPHIC_MEASURE | 0 | 0 |
