TOWARDS_SYMBOL_SIZE
Last modified by superadmin on 2021/05/04 17:11
Controls the size of toward symbols for reinforcement groups and reinforcement columns/beams. Can also be seen in the reinforcement group view 30.
When the variable is not present the default value will be 3*drawing scale, in this case 3*30=90 mm.
The custom value is here chosen to 6 which will be 6*drawing scale, 6*30=180 mm.
When the value is set to 0, the away symbol will be shown in real size, depending on the stirrup dimension. In this case, it will have the dimension 20 mm.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| TOWARDS_SYMBOL_SIZE | 0 | No variable (3*drawing scale) |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| TOWARDS_SYMBOL_SIZE | 0 | 6 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| TOWARDS_SYMBOL_SIZE | 0 | 0 |
