Alert text for Formslab
This set of variables gives you the opportunity to set warnings on your Formslab shop drawings, This is a series of variables and one to turn them on and off.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
USEALERTTEXTFORMSLAB | 0 | 0 |
This variable turns of the warnings for Formslab on the shop drawings.
Example with a user default setting:
Variable | Type | Value |
---|---|---|
USEALERTTEXTFORMSLAB | 0 | 1 |
By turning on this attribute, you activate the following attributes.
Variable | Type | Value |
---|---|---|
FORMSLAB_COVER_NO_ALERT | 0 | 20;25 |
This attribute determines what cover is the standard and does not require a warning on the shop drawing.
Variable | Type | Value |
---|---|---|
FORMSLAB_COVER_ALERT_TEXT | 0 | fx. "ATT! Cover $COVER mm" |
This variable gives you the option to formulate the warning if the cover needs a warning because that is different than normal.
Variable | Type | Value |
---|---|---|
FORMSLAB_EDGE_ALERT | 0 | fx. "FINE;CHAMFER" |
In this variable, you define what edge shall give you a warning on the shop drawing
Variable | Type | Value |
---|---|---|
FORMSLAB_EDGE_ALERT_TEXT | 0 | fx. "ATT! $EDGE" |
This variable gives you the option to formulate the warning for the edges.
Variable | Type | Value |
---|---|---|
ALERT_"CIM NAME" | 0 | fx. "ALERT_0804" |
You can add as many Alerts for CIMs as you want in the system.
Here is a picture of how the warning looks like on the shop drawing, this example has all of the warning mentioned above.
Here is the new block for this alert, you can download it here.
This block should be placed in the drawing template folder under your own standard.
Here is an example
...\Impact 16\Standard\1100\1100\templates_drawings