DWGTEXTCONNECTIONRECESS
Last modified by superadmin on 2021/05/04 17:15
The recess is configured in the hollowcore definition under the tab "Recess edge".
The macros that can be used with the variable are:
$S = Side
$H = Height or countersinking
$L = Length
$W = Width
The "Connection Recess Edge" must be drawn on the shop drawing for this to be shown.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
DWGTEXTCONNECTIONRECESS | 0 | R $S $L $W $H |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
DWGTEXTCONNECTIONRECESS | 0 | WIKI $S $H $L $W |