STAIR_RISER_CIM_EXTENTS_DIMENSION
Last modified by Oskar Kristinsson on 2025/03/05 11:31
Variable to control what dimension lines are shown on the CIM drawings in the shop drawing
This variable is for the Extents dimension
There is also a possibility to have the Linear dimension as well as the Aligned dimension
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| STAIR_RISER_CIM_EXTENTS_DIMENSION | 0 | 1 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| STAIR_RISER_CIM_EXTENTS_DIMENSION | 0 | 0 |
