Stairs variables
Last modified by Oskar Kristinsson on 2025/03/05 12:34
Below are the variables that affect Doublewalls in IMPACT for AutoCAD
| Variable | Short description | Default Value |
|---|---|---|
| STAIR_THICKNESS | Default value for the stair thickness | 150 |
| STAIR_TOTAL_HEIGHT | Default value for the total height of the stairs | 2800 |
| STAIR_HEIGHT_FIRST_STEP | Default value for the height of the first step | 0 (calculated, same as other steps) |
| STAIR_HEIGHT_LAST_STEP | Default value for the height of the last step | 0 (calculated, same as other steps) |
| STAIR_RECESS_HEIGHT_FIRST_STEP | Default value for the remaining height of the first step | 0 (no recess) |
| STAIR_RECESS_HEIGHT_LAST_STEP | Default value for the remaining height of the last step | 0 (no recess) |
| STAIR_RECESS_WIDTH_FIRST_STEP | Default value for the width of the recess for the first step | 0 (no recess) |
| STAIR_RECESS_WIDTH_LAST_STEP | Default value for the width of the recess for the last step | 0 (no recess) |
| STAIR_SURFACE_MATERIAL | Default value for general material in stair surface | "" |
| STAIR_TREAD_MATERIAL_FIRST | Default value for the material for the first tread in the stair surface | "" |
| STAIR_TREAD_MATERIAL_LAST | Default value for the material for the last tread in the stair surface | "" |
| STAIR_TREAD_THICKNESS | Default value of the tread thickness | 30 |
| STAIR_TREAD_OVERHAND_FRONT | Default value of the tread overhang to the front | 10 |
| STAIR_TREAD_OVERHAND_SIDE | Default value of the tread overhang to the side | 0 |
| STAIR_TREAD_GAP | Default value of the tread gap, distance from the tread to the riser | 0 |
| STAIR_SURFACE_FIX_THICKNESS | Default value for the thickness of the fix when the risers and treads are added to the stair at the site | 0 |
| STAIR_RISER_THICKNESS | Default value of the riser thickness | 20 |
| STAIR_RISER_OVERHAND_SIDE | Default value of the riser overhang to the side | 0 |
| STAIR_RISER_PLACING | Default value for the placing is "Behind and below tread" | 1 |
| STAIR_RISER_DIST_BELOW_TREAD | Default value for distance from the top of tread to button edge of the riser | 15 |
| STAIR_RISER_OFFSET_BOTTOM | Activates the text box for the offset | 0 |
| STAIR_RISER_OFFSET_BOTTOM_DIST | Default value for distance offset from the bottom | 0 |
| STAIR_RISER_GAP | Default value of the riser gap, distance from the riser to the tread | 0 |
| STAIR_TREAD_CIM_NAME_PREFIX | Set prefix for autogenerated CIMs for teads | T |
| STAIR_TREAD_CIM_NAME_MIN_LENGTH | Set the minimum length for the tread CIMs names | 4 |
| STAIR_TREAD_CIM_DESCRIPTION | Set to add description for the tread CIM | Tread $Lx$Wx$H |
| STAIR_TREAD_CIM_GROUP_ID | Set what CIM group the tread CIMs to be placed in | "" |
| STAIR_RISER_CIM_NAME_PREFIX | Set prefix for autogenerated CIMs for risers | R |
| STAIR_RISER_CIM_NAME_MIN_LENGTH | Set the minimum length for the riser CIMs names | 4 |
| STAIR_RISER_CIM_DESCRIPTION | Set to add description for the riser CIM | Riser $Lx$Wx$H |
| STAIR_RISER_CIM_GROUP_ID | Set what CIM group the riser CIMs to be placed in | "" |
| STAIR_TREAD_CIM_LINEAR_DIMENSION | Set the linear dimension to be shown in the CIM view for treads | 1 |
| STAIR_TREAD_CIM_ALIGNED_DIMENSION | Set the aligned dimension to be shown in the CIM view for treads | 1 |
| STAIR_TREAD_CIM_EXTENTS_DIMENSION | Set the Extents dimension to be shown in the CIM view for treads | 1 |
| STAIR_TREAD_CIM_ADD_MATERIAL_HATCH | Variable to add hatch to the CIMs in shop drawing for treads | 1 |
| STAIR_RISER_CIM_LINEAR_DIMENSION | Set the linear dimension to be shown in the CIM view for risers | 0 |
| STAIR_RISER_CIM_ALIGNED_DIMENSION | Set the aligned dimension to be shown in the CIM view for risers | 0 |
| STAIR_RISER_CIM_EXTENTS_DIMENSION | Set the extents dimension to be shown in the CIM view for risers | 1 |
| STAIR_RISER_CIM_ANGLED_LEADER_TEXT | set if leader for angled edge is desired | Angled edge |
| STAIR_RISER_CIM_ADD_MATERIAL_HATCH | Variable to add hatch to the CIMs in shop drawing for risers | 1 |