DWGWALLVERTSECTIONCIMDIM
Last modified by AdamCarlson on 2024/02/19 13:23
Sets if dimension line for cast-in materials on walls' vertical sections should be added.
Note: A change in the variable only affects the next drawn section. In the example below, if the variable is set to 1 and the E section was drawn with that setting and now the variable is changed to 0, the next section, F, will be drawn with the new settings applied but the existing section will be kept with the old settings.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| DWGWALLVERTSECTIONCIMDIM | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGWALLVERTSECTIONCIMDIM | 0 | 1 |
