MEPKEYRECESSMTO

Last modified by AdamCarlson on 2021/01/26 15:49

By using this MEPKEYRECESSMTO, the user can control if the recesses from MEP-keys should be presented in the table of holes. 

3mtomeprec.png

This variable will be added under Variables in Standard Admin. AutoCAD needs to be refreshed before the change will affect your drawings.

Example of the IMPACT default setting:

VariableTypeValue
MEPKEYRECESSMTO00

0mtomeprec.png

Figure 1: Recess from MEP-key not presented in the table of holes

Example with a user default setting:

VariableTypeValue
MEPKEYRECESSMTO01

1mtomeprec.png

Figure 2: Recess from MEP-key presented in the table of holes