PLACELIFTATCENTERSOLIDWALL_
Last modified by superadmin on 2021/05/04 17:11
This variable changes the behavior of the lifts, they either follow the center of gravity or the center of the wall.
0 - Lifts are placed at the center of gravity following the contour of the endcap/element.
1 - Center of the solid wall, following the contour of the endcap/element
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| PLACELIFTATCENTERSOLIDWALL | 0 | 0 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| PLACELIFTATCENTERSOLIDWALL | 0 | 1 |
When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run and the drawing redrawn to make the changed settings to take place.
