Draw columns
We are now going to draw two columns. Go to level 1 an find gridline 2 between A and B.
Figure 1. The place to draw the columns.
Go to IMPACT - Elements - Draw Column to start the command.
Select the rectangular beam 'RC40x50' on the project level.
Figure 2. Select the column definition.
Before drawing the columns, ensure that you draw a 'Vertical Column' and that the placement is set to 'Height' and 'Level 2' in the green ribbon above the model view.
Figure 3. Draw vertical columns
Figure 4. Configure height settings before drawing the columns.
Draw the two columns according to the reference on gridline 2 between A and B.
Figure 6. Draw Columns.
Finish with 'Esc' after drawing the two columns.
The next step is to add corbels.
Next: Add corbels
Contents