Hangers
Last modified by Adam Carlson on 2022/12/19 15:33
Start with launching the command Hangers.
The command is used to define hangers that should transfer the load of the hollow core slab to adjacent hollow core slabs or other load-bearing structures.
When the command starts you can define a new hanger or import one from another project. The dialog looks like below.
In this example, we will look at 4413. When editing or creating a new hanger there are two tabs to take a look at.
In the first tab General, you decide how the symbol should look, and different information can be added.
In the next tab Hanger, the user decides the support length and width.
