Show Cores

Last modified by Adam Carlson on 2022/12/22 09:39

Show Cores is used to switch on/off the cores in hollowcores.

2022-12-16 13_49_21111117-Window.png

Below is a picture of a hollowcore with cores shown (green lines).

2022222222-12-16 13_48_10-Window.png

If the button is clicked, the lines will disappear.

2022-12-16 13_48_333333302-Window.png

The lines disappear because one layer, HC_M_CORE, is switched off.

2022-12-16 13_47_34444449-Window.png