RCVIEWVPORTMARGIN
Last modified by Adam Carlson on 2022/11/30 12:41
Determines the distance to the margin for viewports. This affects views 4,5,6 & 7. A larger value makes the margin larger and a smaller number, down to 0, makes the margin smaller.
Note: Don't set the value to 0 as it may cut out some of the measurements.
To be the change even more noticeable, combine with the variable DWGVPORTSCALETOFITROUNDOFF
To change the other views, check VPORTMARGIN
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
RCVIEWVPORTMARGIN | 0 | 1 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
RCVIEWVPORTMARGIN | 0 | 11 |