BAR_MESH_VIEW_RADIUS_MLEADER_ARROW_NAME

Last modified by Dennis Knudsen on 2024/01/31 08:28

BAR_MESH_VIEW_RADIUS_MLEADER_ARROW_NAME sets the arrowhead symbol of the Leader that marks the bending radius in the bending detail in the bar mesh view (View 44). 

The default value of this variable is -, which means the block used in the multileader style is used.

When setting the arrowhead is important that the block name is used below is a list of the blocks that are "Standard" in the "Multileader Style":

  • _BoxBlank
  • _BoxFilled
  • _Closed
  • _ClosedFilled
  • _ClosedBlank
  • _DatumBlank
  • _DatumFilled
  • _Dot
  • _DotBlank
  • _DotSmall
  • _Integral
  • _None
  • _Open
  • _Open30
  • _Open90
  • _Origin
  • _Origin2
  • _Small

If you want to use your own "Arrowhead block" then should it be added in the BL file.

Note: This variable does not change the value in the "Multileader Style" but applies it when it gets inserted on the drawing - Therefore can the value differ between the "Multileader Style" and the drawing if this variable is used.

Example of the IMPACT default setting:

VariableTypeValue
BAR_MESH_VIEW_RADIUS_MLEADER_ARROW_NAME0_ClosedFilled

1706511794541-254.png

VariableTypeValue
BAR_MESH_VIEW_RADIUS_MLEADER_ARROW_NAME0_DotBlank

1706521707768-567.png