BEAM_SECTION_STIRRUP_SHOW_THICKNESS
Last modified by Oskar Kristinsson on 2023/12/05 14:01
This variable controls if you want to show the thickness of stirrups in the section of beam elements.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| BEAM_SECTION_STIRRUP_SHOW_THICKNESS | 0 | 1 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| BEAM_SECTION_STIRRUP_SHOW_THICKNESS | 0 | 0 |
