WALL_SECTION_STIRRUP_SHOW_THICKNESS
Last modified by Oskar Kristinsson on 2023/12/05 13:30
This variable controls if you want to show the thickness of stirrups in the section of wall elements.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
WALL_SECTION_STIRRUP_SHOW_THICKNESS | 0 | 0 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
WALL_SECTION_STIRRUP_SHOW_THICKNESS | 0 | 1 |