Change Notes - Tekla Base Tools
Version 17
Documented new features or changes introduced in service releases.
If a change note forwards to an existing article, the change is marked with (New in QX/202X).
Version 17.2.003 Q2/2025
Released June 2nd, 2025
Note! Requires IMPACT WebAPI 17.2.003 or later. Deployed from IMPACT Service Configuration.
Version 17.2.002
Released April 08th, 2025
Note! Requires IMPACT WebAPI 17.2.002 or later. Deployed from IMPACT Service Configuration.
Version 17.2.001 Q1/2025
Released March 18th, 2025
Note! Requires IMPACT WebAPI 17.2.001 or later. Deployed from IMPACT Service Configuration.
- UDA for CIM reference has now been added to the Tekla Base Tools settings. (Case 136357)
- Dimension setting "Main Part only (Swap width and height)" is now available in Tekla Base tools settings. (Case 136358)
- It is now possible to map Tekla drawing specification values to IMPACT through UDA. (Case 105319)
- When assigning element mark manually in Tekla Base Tools, the name fields are now activated automatically. (Case 134134)
Version 17.1.010
Released January 23nd, 2024
Note! Requires IMPACT WebAPI 17.1.012 or later. Deployed from IMPACT Service Configuration.
Version 17.1.009 Q4/2024
Released December 2nd, 2024
Note! Requires IMPACT WebAPI 17.1.012 or later. Deployed from IMPACT Service Configuration.
- Total Width, Length, and Height UDA are added in Tekla Base Tools. (Case 129198)
- TBT- Lift names for multiple lifts can now be inserted in TBT settings. (Case 133422)
- Importing shop drawing data, drawing status, and drawing revision from Tekla. (Case 135646)
- Special case where some end types of slabs were not correctly visible on PM and Cast planning. (Case 123173)
Version 17.1.008
Released September 27th, 2024
Note! Requires IMPACT WebAPI 17.1.010 or later. Deployed from IMPACT Service Configuration.
Version 17.1.007 Q3/2024
Released August 30th, 2024
Note! Requires IMPACT WebAPI 17.1.009 or later. Deployed from IMPACT Service Configuration.
- Custom weight property in Tekla Base tools. (Case 133488)
Version 17.1.006
Released June 5th, 2024
Note! Requires IMPACT WebAPI 17.1.006 or later. Deployed from IMPACT Service Configuration.
Version 17.1.005
Released May 28th, 2024
Note! Requires IMPACT WebAPI 17.1.006 or later. Deployed from IMPACT Service Configuration.
Version 17.1.004 Q2/2024
Released May 27th, 2024
Note! Requires IMPACT WebAPI 17.1.006 or later. Deployed from IMPACT Service Configuration.
- New setting that allow us to pre-define a transport template in TBT according to the values of the properties. (Case 132290)
- Options in the dimension settings to flip width with height and length with height. (Case 132545)
Version 17.1.001 Q1/2024
Released March 4th, 2024
Note! Requires IMPACT WebAPI 17.1.001 or later. Deployed from IMPACT Service Configuration.
- Shape code SX is saved in the database. (Case 129649)
- Saving elements in TBT continues for all elements that are possible to be saved without interruptions. (Case 130080)
- New dimension settings according to the element type in Tekla Base tools (Case 130882)
Version 17.0.009 Q4/2023
Released December 11th, 2023
Note! Requires IMPACT WebAPI 17.0.019 or later. Deployed from IMPACT Service Configuration.
- Connect Note1, Note2, Note3, and Note 4 to a Tekla UDA and import them with Tekla Base Tools. (Case 129569)
Version 17.0.008
Released September 21st, 2023
Note! Requires IMPACT WebAPI 17.0.014 or later. Deployed from IMPACT Service Configuration.
- UDA added in settings for element weight. (Case 128605)
Version 17.0.007 Q3/2023
Released September 4th, 2023
Note! Requires IMPACT WebAPI 17.0.014 or later. Deployed from IMPACT Service Configuration.
Version 17.0.006 Q2/2023
Released May 29th, 2023
Note! Requires IMPACT WebAPI 17.0.009 or later. Deployed from IMPACT Service Configuration.
- Array element arbitrarily in IMPACT when importing from Tekla. (Case 125279)
- It is now possible to add custom properties from Tekla that define, the inner, outer and insulation panel volume in IMPACT for Sandwich walls. (Case 125278)
Version 17.0.005
Released March 20th, 2023
Note! Requires IMPACT WebAPI 17.0.007 or later. Deployed from IMPACT Service Configuration.
Version 17.0.004 Q1/2023
Released March 6th, 2023
Note! Requires IMPACT WebAPI 17.0.007 or later. Deployed from IMPACT Service Configuration.
Version 17.0.003 Q4/2022
Released December 12th, 2022
Note! Requires IMPACT WebAPI 17.0.004 or later. Deployed from IMPACT Service Configuration.
Version 17.0.002 Q3/2022
Released September 5th, 2022
Note! Requires IMPACT WebAPI 17.0.001 or later. Deployed from IMPACT Service Configuration.
Version 17.0.001
Released June 17th, 2022
Note! Requires IMPACT WebAPI 17.0.001 or later. Deployed from IMPACT Service Configuration.
Version 17.0.000 Q2/2022
Released May 30th, 2022
Note! Requires IMPACT WebAPI 17.0.000 or later. Deployed from IMPACT Service Configuration.
Version 16
Documented new features or changes introduced in service releases.
If a change note forwards to an existing article, the change is marked with (New in QX/202X).
Version 16.0.026 Q1/2023
Released March 6th, 2023
Note! Requires IMPACT WebAPI 16.0.057 or later. Deployed from IMPACT Service Configuration.
Version 16.0.025
Released January 11th, 2023
Note! Requires IMPACT WebAPI 16.0.055 or later. Deployed from IMPACT Service Configuration.
Version 16.0.024 Q4/2022
Released December 12th, 2022
Note! Requires IMPACT WebAPI and Security Server 16.0.055 or later. Deployed from IMPACT Service Configuration.
New Features
- Option to set the position from Tekla for the stirrups. (Case 123222)
Version 16.0.023 Q3/2022
Released September 5th, 2022
Note! Requires IMPACT WebAPI and Security Server 16.0.051 or later. Deployed from IMPACT Service Configuration.
Version 16.0.022 Q2/2022
Released May 30th, 2022
Note! Requires IMPACT WebAPI and Security Server 16.0.048 or later. Deployed from IMPACT Service Configuration.
New Features
- Ignoring preliminary revisions when inserting drawings from Tekla. (Case 120036)
- Setting in Tekla base tools that allow us to bring in IMPACT, the grid lines from Tekla. (Case 117403)
Version 16.0.021
Released March 25th, 2022
Note! Requires IMPACT WebAPI and Security Server 16.0.046 or later. Deployed from IMPACT Service Configuration.
Version 16.0.020 Q1/2022
Released February 27th, 2022
Note! Requires IMPACT WebAPI and Security Server 16.0.042 or later. Deployed from IMPACT Service Configuration.
New Features
Note! Requires IMPACT WebAPI and Security Server 16.0.042 or later. Deployed from IMPACT Service Configuration.
Version 16.0.019 Q1/2022
Released February 21th, 2022
Note! Requires IMPACT WebAPI and Security Server 16.0.042 or later. Deployed from IMPACT Service Configuration.
Version 16.0.018
Released January 20th, 2022
Note! Requires IMPACT WebAPI and Security Server 16.0.037 or later. Deployed from IMPACT Service Configuration.
Version 16.0.017 Q4/2021
Released December 12th, 2021
Note! Requires IMPACT WebAPI and Security Server 16.0.037 or later. Deployed from IMPACT Service Configuration.
Version 16.0.014
Released September 24th, 2021
Note! Requires IMPACT WebAPI and Security Server 16.0.031 or later. Deployed from IMPACT Service Configuration.
New Features
- It is now possible to save the assembly finish from the Tekla Properties to the Remark field in IMPACT, through a setting. (Case 103434)
Version 16.0.013 Q3/2021
Released September 4th, 2021
Note! Requires IMPACT WebAPI and Security Server 16.0.030 or later. Deployed from IMPACT Service Configuration.
New Features
- The CIM are exported with coordinates (in the element coordinate system) for Hollowcore. (Case 105213)
- Import Plinths in IMPACT. (Case 105144)
- New option for adding parts as CIM from Tekla. (Case 103419)
Version 16.0.012
Released June 9th, 2021
Note! Requires IMPACT WebAPI and Security Server 16.0.024 or later. Deployed from IMPACT Service Configuration.
Version 16.0.011 Q2/2021
Released May 31th, 2021
Note! Requires IMPACT WebAPI and Security Server 16.0.023 or later. Deployed from IMPACT Service Configuration.
New Features
- New way of mapping the drawings from Tekla in IMPACT through a UDA. (Case 103057)
- New option for adding parts as CIM from Tekla. (Case 103419)
Version 16.0.010
Released April 8th
Note! Requires IMPACT WebAPI and Security Server 16.0.017 or later. Deployed from IMPACT Service Configuration.
Version 16.0.009 Q1/2021
Released February 18th
Note! Requires IMPACT WebAPI and Security Server 16.0.016 or later. Deployed from IMPACT Service Configuration.
Version 16.0.008 Q4/2020
Released November 26th
Note! Requires IMPACT WebAPI and Security Server 16.0.014 or later. Deployed from IMPACT Service Configuration.
Version 16.0.007
Released September 4th, 2020
Older Versions
Contents
- Version 17
- Version 17.2.003 Q2/2025
- Version 17.2.002
- Version 17.2.001 Q1/2025
- Version 17.1.010
- Version 17.1.009 Q4/2024
- Version 17.1.008
- Version 17.1.007 Q3/2024
- Version 17.1.006
- Version 17.1.005
- Version 17.1.004 Q2/2024
- Version 17.1.001 Q1/2024
- Version 17.0.009 Q4/2023
- Version 17.0.008
- Version 17.0.007 Q3/2023
- Version 17.0.006 Q2/2023
- Version 17.0.005
- Version 17.0.004 Q1/2023
- Version 17.0.003 Q4/2022
- Version 17.0.002 Q3/2022
- Version 17.0.001
- Version 17.0.000 Q2/2022
- Version 16
- Version 16.0.026 Q1/2023
- Version 16.0.025
- Version 16.0.024 Q4/2022
- Version 16.0.023 Q3/2022
- Version 16.0.022 Q2/2022
- Version 16.0.021
- Version 16.0.020 Q1/2022
- Version 16.0.019 Q1/2022
- Version 16.0.018
- Version 16.0.017 Q4/2021
- Version 16.0.014
- Version 16.0.013 Q3/2021
- Version 16.0.012
- Version 16.0.011 Q2/2021
- Version 16.0.010
- Version 16.0.009 Q1/2021
- Version 16.0.008 Q4/2020
- Older Versions