Standard Admin
Common and local levels
The common level is the top level where data in IMPACT can be stored. Information stored at this level is visible/available for all projects created in the current drawing standard.
Specific data for certain factories or branches is more suitably stored on a lower level such as the local level. Only projects that have been created under that specific factory/branch (Industrial, housing, farming etc.) can then access the data.
Settings
Covers the setting node in Standard Admin.
Elements
Drawings
- Drawing types
- Sheet
- Panel
- Status
- Specifications
- Templates
- Folders
Layer Standards
Reinforcements
- Default
- Definitions
CIM groups
Variables
We are currently working with adding all the variables for Standard Admin to this wiki, and the work will be finished within a short future. Due to this, some of the pages may not be 100% completed.
Variables in Standard Admin makes it possible for the user to customize the different applications in IMPACT so it fits personal preferences. All variables, except those for IMPACT reinforcement, can be found under Common/Variables (1) in Standard Admin. Variables for IMPACT reinforcement can be found under Common/Reinforcements/Default (2) in Standard Admin. Below, the variables are categorized to make it easier to find the right one for the right purpose.
Figure 1: Left: Location of most variables. Right: Location of variables for the Reinforcement.
Export Conversion
Production Settings
Components
Covers the components node in Standard Admin.